Taping for Automatic Insertion of SMD Coil and Filters

Type Qty pcs.
XRJ0754 800

Dimensions(mm)
A B C D E
7.9 7.8 12 11.5 24
F G H I J
0.4 5.6 24.4 30.4 330

Notes:

  1. The cover tape must not cover the lead holes, and must not protrude from the embossed tape.
  2. Peel force of the cover tape must be within 0.1 ~ 1.3N (10.2 ~ 133gf).
  3. If the tape width is 8mm, it must be within 0.1 ~ 1.0N (10.2 ~ 102gf).
  4. The tolerance for accumulated of 10 holes must be within 40 ± 0.2mm.
  5. The insertion direction of parts must be in the same direction, and the electrode side must be positioned on the bottom.
  6. The missing components per reel is within 1 piece.
  7. The reel shows part number, quantity and the lot number.
  8. For others not specified here will follow IEC60286-3 Packaging of components for automatic handling-Part 3: Packaging of surface mount components on continuous tapes.