Taping for Automatic Insertion of SMD Coil and Filters
Type |
Qty pcs. |
XRJ3225M |
2000 |
Dimensions(mm) |
A |
B |
C |
D |
E |
2.8 |
3.5 |
4 |
3.5 |
8 |
F |
G |
H |
I |
J |
0.22 |
2.15 |
8.4 |
14.4 |
178 |
Notes:
- The cover tape must not cover the lead holes, and must not protrude from the embossed tape.
- Peel force of the cover tape must be within 0.1 ~ 1.3N (10.2 ~ 133gf).
- If the tape width is 8mm, it must be within 0.1 ~ 1.0N (10.2 ~ 102gf).
- The tolerance for accumulated of 10 holes must be within 40 ± 0.2mm.
- The insertion direction of parts must be in the same direction, and the electrode side must be positioned on the bottom.
- The missing components per reel is within 1 piece.
- The reel shows part number, quantity and the lot number.
- For others not specified here will follow IEC60286-3 Packaging of components for automatic handling-Part 3: Packaging of surface mount components on continuous tapes.