Taping for Automatic Insertion of SMD Coil and Filters
Type |
Qty pcs. |
CWR1242C |
800 |
Dimensions(mm) |
A |
B |
C |
D |
E |
12.6 |
12.6 |
16 |
11.5 |
24 |
F |
G |
H |
I |
J |
0.4 |
4.6 |
25.5 |
29.5 |
330 |
Notes:
- The cover tape must not cover the lead holes, and must not protrude from the embossed tape.
- Peel force of the cover tape must be within 0.1 ~ 1.3N (10.2 ~ 133gf).
- If the tape width is 8mm, it must be within 0.1 ~ 1.0N (10.2 ~ 102gf).
- The tolerance for accumulated of 10 holes must be within 40 ± 0.2mm.
- The insertion direction of parts must be in the same direction, and the electrode side must be positioned on the bottom.
- The missing components per reel is within 1 piece.
- The reel shows part number, quantity and the lot number.
- For others not specified here will follow IEC60286-3 Packaging of components for automatic handling-Part 3: Packaging of surface mount components on continuous tapes.